Carbon terminology
Contents |
[edit] Introduction
Net-zero, carbon free, embodied carbon and offsetting carbon: each concept is a step in the right direction to tackle the climate emergency, but the terminology needs demystifying. This carbon-jargon busting article explores each concept, how it is being implemented and what this means for the built environment.
[edit] Net-zero
Since the UK government’s announcement that it would target net-zero by 2050, the phrase 'net-zero' has become the most well-known term when it comes to reducing the impact of climate change.
Net-zero is the balance between the emissions that are produced and the emissions that are removed from the atmosphere. Emissions are removed by offsetting carbon. Ref http://www.lse.ac.uk/GranthamInstitute/news/what-is-net-zero/
Net-zero is the goal, outlined below are the ways to make it happen. For more information see: Net-zero carbon and Net zero carbon emissions.
[edit] Carbon neutral
The journey to achieving net-zero means knowing how to offset emissions. According to the Carbon Trust, carbon neutrality is achieved when the emissions produced are offset by carbon credits or natural carbon sinks.
Carbon credits are permits, and work as part of a ‘cap and trade’ programme. Companies that pollute are given a limit, in credits, that they can pollute up to. Any unused credits can be sold to another company that is exceeding its limit. The aim is for companies that pollute to reduce their emissions and over time their limits for pollution are reduced.
Natural carbon sinks are ecosystems such as the ocean or forests. They absorb and store around half of the carbon dioxide (CO2) produced by human activity. However, these ecosystems are under threat due to increased emissions and deforestation.
Political awareness of the need to increase tree cover as a viable solution to reduce CO2 emissions has grown recently. This awareness also places responsibility on the timber industry and wider construction industry to ensure timber is sustainably sourced, particularly tropical timber.
To determine if a building or building product is carbon neutral, there is a standard to prove that it genuinely offsets carbon emissions and is not ‘greenwashing’. PAS 2060 can be used to prove carbon neutrality for buildings, product lines, manufacturing and more.
For more information see: Carbon neutral.
[edit] Carbon positive and carbon negative
Confusingly, carbon positive and carbon negative initiatives both seek the same outcome: to remove more carbon from the world than they add. This is the next step after net-zero.
For more information see: Carbon negative.
[edit] Sequestered carbon / carbon capture
To sequester carbon is to capture CO2 from the Earth’s atmosphere and store it. This can be done in a natural or manufactured way. Trees naturally absorb and capture CO2, acting as a natural store. Consequently, forests and woodlands are considered to be efficient natural carbon sinks.
Carbon capture and storage (CCS) is a new technology to remove CO2 emissions from fossil fuel power stations and industrial processes that use or produce coal and gas. The CO2 can be captured in three different ways and in the UK, it is stored offshore.
Carbon can be captured or sequestered in buildings and building products made from wood.
For more information see: Carbon capture and storage.
[edit] Embodied carbon
Embodied carbon is defined by the UK Green Building Council as ‘the total greenhouse gas emissions generated to produce a built asset’. This means knowing how much CO2 is emitted from extraction, processing and manufacturing, transportation and assembly of every building product used. It extends to the lifecycle of each product so also considers end of life.
For more information see: Embodied carbon.
[edit] Operational carbon
Operational carbon is often measured alongside embodied carbon. It is the collective CO2 emissions produced in order for a building to run, from the energy and ventilation systems through to IT equipment.
For more information see: Operational carbon.
[edit] Taking action
The UK built environment currently contributes around 40% of the country’s total carbon emissions. To reach the 2050 net-zero goal, new homes need to be built to offset carbon. Even with the most natural building materials, CO2 will be released before and during the construction process. By estimating embodied and operational carbon, designers can ensure this is offset through the materials, products and systems used.
[edit] Related articles on Designing Buildings Wiki
- Capital carbon.
- Carbon.
- Carbon capture and storage.
- Carbon emissions.
- Carbon emissions reduction target CERT.
- Carbon factor.
- Carbon footprint.
- Carbon hotspot.
- Carbon negative.
- Carbon neutral.
- Carbon plan.
- Carbon price.
- Climate Change Act.
- CRC Energy Efficiency Scheme.
- Embodied carbon.
- Embodied energy.
- Emission rates.
- Low carbon.
- Low carbon construction IGT.
- Net-zero carbon.
- Net zero carbon emissions.
- Operational carbon.
- PAS 2060.
- Sustainable materials.
- The Carbon Plan: Delivering our low carbon future.
- What we need for the journey to net-zero carbon emissions.
- Zero carbon homes.
Featured articles and news
One of the most impressive Victorian architects. Book review.
RTPI leader to become new CIOB Chief Executive Officer
Dr Victoria Hills MRTPI, FICE to take over after Caroline Gumble’s departure.
Social and affordable housing, a long term plan for delivery
The “Delivering a Decade of Renewal for Social and Affordable Housing” strategy sets out future path.
A change to adoptive architecture
Effects of global weather warming on architectural detailing, material choice and human interaction.
The proposed publicly owned and backed subsidiary of Homes England, to facilitate new homes.
How big is the problem and what can we do to mitigate the effects?
Overheating guidance and tools for building designers
A number of cool guides to help with the heat.
The UK's Modern Industrial Strategy: A 10 year plan
Previous consultation criticism, current key elements and general support with some persisting reservations.
Building Safety Regulator reforms
New roles, new staff and a new fast track service pave the way for a single construction regulator.
Architectural Technologist CPDs and Communications
CIAT CPD… and how you can do it!
Cooling centres and cool spaces
Managing extreme heat in cities by directing the public to places for heat stress relief and water sources.
Winter gardens: A brief history and warm variations
Extending the season with glass in different forms and terms.
Restoring Great Yarmouth's Winter Gardens
Transforming one of the least sustainable constructions imaginable.
Construction Skills Mission Board launch sector drive
Newly formed government and industry collaboration set strategy for recruiting an additional 100,000 construction workers a year.
New Architects Code comes into effect in September 2025
ARB Architects Code of Conduct and Practice available with ongoing consultation regarding guidance.
Welsh Skills Body (Medr) launches ambitious plan
The new skills body brings together funding and regulation of tertiary education and research for the devolved nation.
Paul Gandy FCIOB announced as next CIOB President
Former Tilbury Douglas CEO takes helm.